TotalBoat TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Pint Kit)

Next time you get a dent or ding in your boat, don't go to the boatyard, fix it yourself with TotalBoat TotalFair epoxy fairing compound. This lightweight two-part premium marine epoxy putty is ideal for fairing, filling, and shaping, making it the perfect total boat fairing compound for repairs all over your boat. Because TotalFair bonds strongly and has a high tolerance for flexing without cracking, it's ideal for hulls, decks, keels, topsides and more. It's also great for fixing dings and dents on your car, motorcycle, or rv. This waterproof marine fairing compound can be used above or below the waterline on fiberglass, aluminum, steel, wood and cast iron. TotalFair has a simple 1 to 1 mix ratio and changes to a green color when you mix the blue and yellow components for 3-5 minutes. Its thick, creamy consistency makes this fiberglass fairing compound easy to spread, and helps it hold its shape on vertical and overhead surfaces. If you're fairing a large gouge, we recommend a 6 to 1 width to depth ratio per application. For deep/narrow areas that exceed 6 to 1, you'll need to apply TotalFair in stages, building depth with each application. At 80°F, TotalFair is ready to sand in just 3 hours to a smooth, pinhole-free surface. Be sure to wear protective gloves when mixing, and a proper respirator when sanding cured TotalFair. Do not apply gelcoat directly on cured TotalFair or the gelcoat will not cure properly. Apply TotalBoat 2-Part Epoxy Primer or TotalBoat TotalProtect Barrier Coat before applying gelcoat. Compare TotalFair to two-part epoxy putty products such as Interlux Watertite Epoxy Filler, Awlgrip Awlfair, System Three Quikfair, 3M premium marine filler, Pro Set, 4100 and Pettit EZ Fair. TotalFair epoxy filler is also stronger and more waterproof than a vinylester or polyester fairing compound. Store at 60-90°F. All TotalBoat products are developed for boaters, by boaters to provide great value and great results. 100% made in the USA.

• HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair.
• SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline.
• NEW IMPROVED FORMULA EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix blue and yellow components until they turn green. Now easier to scoop, mix, spread, and feather to a fine edge; won't sag on vertical and overhead surfaces.
• CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 4 hours at 80°F; cured fairing compound sands even easier with improved formula; compatible with latex and epoxy primers and paints
• CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair.